We awoke to a white world this morning. I measured one inch of snow on the deck and reported the first snow of the season to CoCoRaHS. It seems early, but that's only because we've had unusually warm weather so recently. It's a huge chance to adjust to!
Here is the latest work schedule on the Route 2 project over in East and South Cabot. They are winding down now, getting ready to pull out. The bridge being straightened should be a big improvement, especially for commuters this winter. That was always a very dangerous curve. Drive carefully - it always takes a while for folks to get the hang of driving on snowy roads and possibly ice again this time of year - and lost of folks are still driving with summer tires. We have to not only remember to adjust our own driving, we have to watch out for other drivers on the road.
__________________________
Proposed Work Schedule, Week of 10/22/18, Cabot-Danville US 2 Reconstruction [Cabot-Danville FEGC F 028-3(36) C/2]
Project Location: The 1.4 mile project extends along US 2 from Last Road to Danville Hill Road in Cabot. This is a multi-year project with most of the work occurring in 2017/2018. Completion is scheduled for 2019.
Slope and ditch work from the Goodrich property back towards Houghton Rd. will continue next week.
Side road work will continue at Houghton Rd.
Excavation at Last Road will continue next week.
TRAVEL ALERT:
A speed reduction zone of 40 mph is in place for this project. There
are increased fines for speed violations within the construction zone.
Please
focus on safety when driving through the construction work zone and
remember, it is against the law to use a hand held cell phone while
driving in Vermont.
Contact
Natalie Boyle, Project Outreach Coordinator, EIV Technical Services,
with any questions or concerns in regard to this project at 802-855-3893
or nboyle@eivtech.com
Natalie Boyle
Director of Communications
EIV Technical Services
The City Lights Building
106 East Allen St., Unit 506
Winooski, VT 05404
cell: 802.855.3893
office: 802.497.3653 ext.1037
No comments:
Post a Comment